Pioneer VSA-AX10 - Manual (Page 111)

111
En
Techno Tidbits & Problem-solving
EXPER
T
• Connect two surround back speakers
(p.26) and make the settings accordingly
(p.40).
• The MCACC system will automatically
compensate for a delay in the subwoofer
output during the Auto Surround Sound
Setup.
• Turn off the amplifier one second or
more after changing the volume.
• Turn off the amplifier one second or
more after changing the amplifier status.
Problem Cause Remedy
• The current setting is for only one
surround back speaker.
• The subwoofer channel can be delayed
slightly if run through a low-pass filter.
• Turning off the amplifier immediately
after changing the volume level.
• Turning off the amplifier immediately
after changing the amplifier status.
If the unit does not operate normally due to external effects such as static electricity
Disconnect the power plug from the outlet and insert again to return to normal operating conditions.
Miscellaneous
HOME THX 7.1 channel mode
is selected, but there are
certain options that can't be
chosen.
There seems to be a time lag
between the speakers and
the output of the subwoofer.
The amplifier doesn’t
memorize the volume level
last used before turn off.
The amplifier doesn’t
memorize that status of the
amplifier last used before
turn off.