Din front-mount, Installation with the rubber bush (fig. 6), Removing the unit (fig. 7) (fig. 8) – Pioneer DEH-P9800BT User Manual

Page 9

English

Español

Deutsch

Français

Italiano

Nederlands

PyÒÒÍËÈ

Dashboard

Holder
After inserting the holder into the dash-
board, then select the appropriate tabs
according to the thickness of the dash-
board material and bend them.
(Install as firmly as possible using the
top and bottom tabs. To secure, bend
the tabs 90 degrees.)

Rubber bush

Screw

DIN Front-mount

Installation with the rubber bush (Fig. 6)

Fig. 6

Removing the Unit (Fig. 7) (Fig. 8)

Fig. 7

Fig. 8

182

Frame

To remove the frame, extend top and
bottom of the frame outwards in order
to unlock it. (When reattaching the
frame, point the side with a groove
downwards and attach it.)
• It becomes easy to remove the

frame if the front panel is released.

Insert the supplied extraction keys
into the unit, as shown in the figure,
until they click into place. Keeping
the keys pressed against the sides of
the unit, pull the unit out.