Improving poor fm reception, Memorizing stations, Listening to station presets – Pioneer DCS-370 User Manual
Page 13: Listening to other sources, Setting the sleep timer, S l p, Getting started 02
Getting started
02
13
En
English
Français
Deutsch
Nederlands
Italiano
Español
Improving poor FM reception
If you’re listening to an FM station in stereo but
the reception is weak, you can improve the
sound quality by switching to mono.
1
Tune to an FM radio station then press
SETUP.
2
Use
/ to choose FM MODE then press
ENTER.
3
Use
/ to select FM MONO then press
ENTER.
The mono indicator (
) lights when the tuner
is in mono reception mode.
Select
FM AUTO above to switch back to auto-
stereo mode (the stereo indicator (
) lights
when receiving a stereo broadcast).
Memorizing stations
You can save up to 30 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
each time.
1
Tune to an AM or FM radio station.
For the FM band, select mono or auto-stereo
reception as necessary. This setting is saved
along with the preset.
2
Press SETUP and use
/ to choose
‘ST.MEM.’ then press ENTER.
3
Use
/ to select the station preset you
want then press ENTER.
Listening to station presets
1
Make sure the TUNER function is
selected.
2
Use the ST +/– buttons to select a station
preset.
• You can also use the number buttons to do
this.
Listening to other sources
You can connect auxiliary sources (TV, satellite
receiver, etc.) to this unit for playback through
the speaker system. See Connecting auxiliary
audio components on page 32 for more on this.
• To connect a USB device to the USB
terminal, see USB playback on page 23.
1
Make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2
Press LINE to select the source.
Each press switches between
LINE1 and
LINE2.
3
If necessary, start playback of the source.
Setting the sleep timer
The sleep timer switches off the system after
about an hour so you can fall asleep without
worrying about it.
1
•
Press SHIFT+SLEEP repeatedly to select an
option then press ENTER.
Choose between the following options:
•
SLP ON – Switches off after about an hour
•
SLP OFF – Cancels the sleep timer
After selecting
SLP ON, you can press
SHIFT+SLEEP again to check how much time is
left. Each line indicates approximately 12
minutes (remaining):
Note
1 The display dims when the sleep timer is set, and the power indicator is turned off.
S L P - - - - -
DCS-363.book 13 ページ ２００７年１月１６日 火曜日 午前１１時５５分