Pioneer AVH P4300DVD - Manual (Page 12)

Connecting and installing
the optical cable connection
box (AVH-P4300DVD only)
WARNING
! Avoid installing the optical cable connection
box in locations where the operation of safety
devices such as airbags is prevented by this
unit. Otherwise, there is a danger of a fatal ac-
cident.
! Avoid installing the optical cable connection
box in locations where the operation of the
brake may be prevented. Otherwise, it may re-
sult in a traffic accident.
! Fix the optical cable connection box securely
with the hook and loop fastener or lock tie. If
the unit is loose, it disturbs driving stability,
which may result in a traffic accident.
CAUTION
! Install this unit using only the parts supplied
with this unit. If other parts are used, this unit
may be damaged or could dismount itself,
which leads toan accident or other problems.
! Do not install this unit near the doors where
rainwater is likely to be spilled on the unit. In-
cursion of water into the unit may cause
smoke or fire.
Connecting the optical cable
1 Connect the optical cable and ground
lead to the main unit.
Connect the optical cable so that it does not
protrude from the main unit, as shown in the
illustration. Fasten the ground lead to the pro-
trusion on the back of the main unit.
1
1 Screw
2 Connect the optical cable to the optical
cable connection box.
1
1 Optical cable
Installing the optical cable
connection box
% When installing the optical cable con-
nection box with the hook andloop fasten-
er.
Install the optical cable connection box using
the hook and loop fastener in the ample space
of the console box.
1
2
1 Hook fastener
2 Loop fastener
12
En
12
Section
01 Connecting the units