Available accessories playing songs on ipod, Basic operation 40, Displaying text information on – Pioneer DEH-P5100UB User Manual
Page 40: Ipod, Browsing for a song 40, Introduction to advanced, Operations, Playing songs on ipod, Available accessories, Basic operation

Playing songs on iPod
Basic operation
You can use this unit to control an interface
adapter for iPod (e.g. CD-IB100
N), which is sold
separately.
1 Song number indicator
2 Play time indicator
3 Song time (progress bar)
% Fast forward or reverse
Push and hold
MULTI-CONTROL left or right.
% Select a track
Push
MULTI-CONTROL left or right.
Notes
! Read the precautions for iPod in the following
section. Refer to page 63.
! If an error message is displayed, refer to Error
! When the ignition switch is set to ACC or ON,
the iPod
’s battery is charged while the iPod is
connected to this unit.
! While the iPod is connected to this unit, the
iPod cannot be turned on or off.
! Before connecting the dock connector of this
unit to the iPod, disconnect the headphones
from the iPod.
! The iPod is turned off about two minutes after
the ignition switch is set to OFF.
Displaying text information on
iPod
% Press DISP/SCRL to select the desired
text information.
Play time
— : artist name and
: song title
— : artist name and
: album name
— :
album name and
: song title
— : song title
and play time
# If the characters recorded on the iPod are not
compatible with this unit, those characters are
not displayed.
Notes
! You can scroll the text information to the left
by pressing and holding
DISP/SCRL.
! When Ever Scroll is set to ON at the initial set-
ting, text information scrolls continuously in
the display. Refer to Switching the ever scroll
on page 36.
Browsing for a song
The operation is the same as that of the iPod
connected to USB interface of this unit. (Refer
to Browsing for a song on page 24.)
However, the selectable categories are slightly
different. Selectable categories are
Playlists (playlists)
—Artists (artists)—
Albums (albums)
—Songs (songs)—Genres
(genres)
Introduction to advanced
operations
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
3
Turn MULTI-CONTROL to select the
function.
Play mode (repeat play)
—Shuffle mode
(shuffle)
—Pause (pause)
Available accessories
En
40
Section
06