Storing and recalling broadcast, Frequencies, Receiving pty alarm broadcasts 12 – Pioneer DEH-P5100UB User Manual

Page 12: Introduction to advanced, Operations, Operating this unit, Storing and recalling broadcast frequencies, Receiving pty alarm broadcasts, Introduction to advanced operations

4 Preset number indicator
5 Signal level indicator

Shows the radio wave strength.

6 Frequency indicator

% Select a band
Press

BAND/ESC.

# Band can be selected from among FM1, FM2,
FM3 or MW/LW.

% Manual tuning (step by step)
Push

MULTI-CONTROL left or right.

% Seek tuning
Push and hold

MULTI-CONTROL left or right,

and then release.

# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
# While pushing and holding MULTI-CONTROL
left or right, you can skip stations. Seek tuning
starts as soon as you release

MULTI-CONTROL.

Notes

! This unit’s AF (alternative frequencies search)

function can be turned on and off. AF should
be off for normal tuning operation (refer to the
next page).

! RDS service may not be provided by all sta-

tions.

! RDS functions such as AF and TA are only ac-

tive when your radio is tuned to an RDS sta-
tion.

Storing and recalling broadcast
frequencies

You can easily store up to six broadcast fre-
quencies for later recall.
! Six stations for each band can be stored in

memory.

Press

/LIST.

Preset screen is displayed.

Use MULTI-CONTROL to store the se-

lected frequency in memory.
Turn to change the preset number. Press and
hold to store.

Use MULTI-CONTROL to select the de-

sired station.
Turn to change the station. Press to select.

# You can also change the station by pushing
MULTI-CONTROL up or down.
# To return to the ordinary display, press
BAND/ESC or

LIST.

# If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
# You can also recall radio station frequencies
assigned to preset tuning numbers by pushing
MULTI-CONTROL up or down during the fre-
quency display.

Receiving PTY alarm broadcasts

When the emergency PTY code broadcasts,
the unit receives it automatically (

ALARM ap-

pears). When the broadcasting ends, the sys-
tem returns to the previous source.
! An emergency announcement can be can-

celed by pressing

TA/NEWS.

You can also cancel an emergency an-
nouncement by pressing

SRC/OFF,

BAND/ESC or MULTI-CONTROL.

Introduction to advanced
operations

Press MULTI-CONTROL to display the

main menu.

Use MULTI-CONTROL to select

FUNCTION.
Turn to change the menu option. Press to se-
lect.

Operating this unit

Section