Pioneer CNSD-250FM - Manual (Page 20)

The navigation system
upgrade process
1 Check the device number of your naviga-
tion system.
= For details of the operation, refer to
Checking the device number on this
page.
j
2 Check the version information.
= For details, refer to Checking the current
version on this page.
j
3 Get the password for authentication.
= For details, refer to Getting the password
for authentication on the next page.
j
4 Upgrade the software programme of your
navigation system.
= For details of the operation, refer to Up-
grading the software programme and the
map database on the next page.
j
5 Check whether the upgrade was done prop-
erly.
= For details, refer to Checking whether
the upgrade was done properly on page
22.
j
6 Update the Bluetooth firmware.
= For details, refer to Updating the Blue-
tooth wireless technology software on
page 23.
Preparation for upgrade
Checking the device number
First, check your device number
(DEVICE NUMBER, displayed such as
Device Number or Device#) of your navigation
system for later procedures. To display the de-
vice number, do the following.
1 Park your vehicle in a safe place and
apply the handbrake.
2 Insert the upgrade SD memory card
into the SD card slot.
3 Turn the ignition switch OFF and back
ON to reboot the navigation system.
After a short pause, the device number will ap-
pear.
4 Write down your device number
(Device#) onto the supplied Media Number
Card (MEDIA NUMBER CARD) to avoid mis-
takes.
5 Touch [Cancel].
The navigation system restarts.
6 Turn off the vehicle engine to termi-
nate the system.
The navigation system is also turned off.
7 Eject the upgrade SD memory card.
Checking the current version
You may need the version information to con-
firm completion of upgrade. Check the version
information using the following procedure.
1 Press the MENU button to display the
“Top Menu”, and then touch [Settings].
2 Touch [System Settings].
The
“System Settings” menu appears.
3 Touch [Service Information] on the
“System Settings” menu.
4 Write down the version displayed in
“Map Version” and “Version”.
Engb
20
Chapter
04 Instructions for upgrading