Pioneer AVIC-F930BT - Manual (Page 118)

Using the touch panel keys
1 3
4
5
6
2
1 Recalls equaliser curves
= For details, refer to Using the equaliser
on page 143.
2 Sends a band command
Touch to send a band command to the exter-
nal unit.
p Operation varies depending on the ex-
ternal unit connected. (In some cases,
the external unit may not respond.)
3 Uses [F1] through [F4] to operate the ex-
ternal unit
The external unit can be operated by transmit-
ting the operating commands set to
“F1”
through
“F4”.
p The operating commands set to “F1”
through
“F4” vary depending on the ex-
ternal unit.
p Some functions may not be used until
you touch and hold the key.
4 Switches between automatic and manual
function
You can turn automatic and manual function
on or off.
You can switch between
“Auto” and
“Manual” functions of the external unit con-
nected.
Initially, this function is set to
“Auto”.
p Operating commands set for “Auto”
and
“Manual” operations vary depend-
ing on the external unit connected.
5 Sends a command [a], [b], [c], or [d]
Touch to operate the external unit.
p Operation varies depending on the ex-
ternal unit connected. (In some cases,
some functions may not be used until
you touch and hold the key.)
6 Sends a [1] key to [6] key command
The external unit can be operated by transmit-
ting the operating commands set to
“1” key
through
“6” key.
p Operation varies depending on the ex-
ternal unit connected. (In some cases,
some functions may not be used until
you touch and hold the key.)
Engb
118
Chapter
25 Using the external unit (EXT1, EXT2)