Pioneer AVH-P3100DVD - Manual (Page 83)

3 Touch c or d to adjust the distance be-
tween the selected speaker and the listen-
ing position.
Each time you touch c or d increases or de-
creases the distance.
0.0cm to 500.0cm is dis-
played as the distance is increased or
decreased.
Using the equalizer
The equalizer lets you adjust the equalization
to match the car
’s interior acoustic character-
istics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display Equalizer curve
Powerful Powerful
Natural Natural
Vocal Vocal
Flat Flat
Custom1 Custom 1
Custom2 Custom 2
Super Bass Super bass
! Custom1 and Custom2 are adjusted equal-
izer curves.
! When Flat is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
Flat and a set equalizer curve.
1 Touch Parametric EQ.
2 Touch a or b to select the desired item.
Each time you touch a or b selects the item
in the following order:
Equalizer (equalizer)
—SP-Select (speakers)—
Band (bands) —Frequency (center frequency)
—Level (equalizer level)—Q. Factor (Q factor)
3 Touch d to select the equalizer.
Touch d repeatedly to switch between the fol-
lowing equalizers:
Powerful
—Natural—Vocal—Flat—Custom1
—Custom2—Super Bass
Adjusting 3-band parametric equalizer
For Custom1 and Custom2 equalizer curves,
you can adjust the front, rear and center
equalizer curves separately by selecting a cen-
ter frequency, an equalizer level and a Q factor
for each band.
! A separate Custom1 curve can be created
for each source.
! A Custom2 curve can be created common
to all sources.
! The center speaker largely determines the
sound image and getting the balance right
isn
’t easy. We recommend reproducing a 2-
ch. audio (a CD for example) and getting
the balance right among the speakers ex-
cept for the center, and then reproducing a
5.1-ch. audio (Dolby Digital or DTS) and ad-
justing the center speaker output to the
balance you have already got among the
other speakers.
1 Touch Parametric EQ.
2 Touch a or b to select the desired item.
Each time you touch a or b selects the item
in the following order:
Equalizer (equalizer)
—SP-Select (speakers)—
Band (bands)
—Frequency (center frequency)
—Level (equalizer level)—Q. Factor (Q factor)
3 Touch d to select the equalizer.
Touch d repeatedly to switch between the fol-
lowing equalizers:
Powerful
—Natural—Vocal—Flat—Custom1
—Custom2—Super Bass
4 Touch b and then touch c or d to se-
lect the speaker to be adjusted.
Touch c or d until the desired speaker ap-
pears in the display.
Available accessories
En
83
Section
19
A
vailable
accessories