Setting the menu language, Setting the angle icon display, Setting the aspect ratio – Pioneer AVH-P3100DVD User Manual
Page 51: Setting the slide show interval, Setting the, Setting up the dvd player
! You can also switch the audio language by
touching
Audio during playback. (Refer to
Changing audio language during playback
(Multi-audio) on page 25.)
! Even if you use Audio during playback to
switch the audio language, this does not af-
fect the settings here.
Setting the menu language
You can set the preferred language for dis-
plays of menus recorded on a disc.
1
Touch Menu Language on the DVD
setup menu.
A menu language menu is displayed.
2
Touch the desired language.
The menu language is set.
# If you have selected Others, refer to When you
select
Note
If the selected language is not recorded on the
disc, the language specified on the disc is dis-
played.
Setting the angle icon display
You can set it up so that the angle icon ap-
pears on scenes where the angle can be
switched.
! Initially, this function is set to on.
% Touch Multi Angle on the DVD setup
menu to turn angle icon display on.
# To turn the angle icon display off, touch
Multi Angle again.
Setting the aspect ratio
There are two kinds of display. A wide screen
display has a width-to-height ratio (TV aspect)
of 16:9, while a regular display has a TV aspect
of 4:3. Be sure to select the correct TV aspect
for the display connected to
V OUT.
! When using a regular display, select either
Letter Box or Pan Scan. Selecting 16 : 9
may result in an unnatural picture.
! If you select the TV aspect, the unit’s dis-
play changes to the same setting.
% Touch TV Aspect on the DVD setup
menu to select the TV aspect.
Touch
TV Aspect repeatedly until the desired
TV aspect appears in the display.
! 16 : 9 – Wide screen picture (16:9) is dis-
played as it is (initial setting)
! Letter Box – The picture is the shape of a
letterbox with black bands at the top and
bottom of the screen
! Pan Scan – The picture is cut short at the
right and left of the screen
Notes
! When playing discs that do not specify
Pan Scan, playback is with Letter Box even if
you select
Pan Scan setting. Confirm whether
the disc package bears the
16 : 9 LB
mark.
! Some discs do not enable changing of the TV
aspect. For details, refer to the disc
’s in-
structions.
Setting the slide show interval
Slide show is possible when JPEG files are
playing with this unit. In this setting, interval
of slide show can be set.
% Touch Slide Show on the DVD setup
menu to select the slide show interval.
Touch
Slide Show repeatedly until the desired
setting appears in the display.
! 10sec – JPEG images switch at intervals of
10 seconds
! 20sec – JPEG images switch at intervals of
20 seconds
! 30sec – JPEG images switch at intervals of
30 seconds
Setting up the DVD player
En
51
Section
14
Setting
up
th
e
DVD
player