Pioneer AVH-P3100DVD - Manual (Page 16)

Listening to the radio
2 2 2 1 1 1 3 3 3 4 4 4
8 5 6 7
RDS
2 2 2 1 1 1 3 3 3 9 9 9
8 a
Non-RDS or MW/LW
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting in the following section.
Refer to page 18.
! This unit’s AF (alternative frequencies
search) function can be turned on and off.
AF should be off for normal tuning opera-
tion (refer to page 18).
! RDS (radio data system) contains inaudible
information that helps search for the radio
stations.
1 Source icon
Shows which source has been selected.
2 Band indicator
Shows which band the radio is tuned to,
MW/LW or FM.
3 Preset number indicator
Shows which preset has been selected.
4 Program service name
Shows the name of broadcast program (pro-
gram service name).
5 NEWS indicator
Appears when the set news program is re-
ceived.
6 TRFC indicator
Appears when a TP station is tuned in.
7 Text indicator
Shows when the radio text is received.
8 5 (stereo) indicator
Appears when the selected frequency is
being broadcast in stereo.
9 Frequency indicator
Shows the frequency to which the tuner is
tuned.
a Local indicator
Appears when local seek tuning is on.
1 Touch the source icon and then touch
Radio to select the radio.
2 Touch Band to select a band.
Touch Band until the desired band (FM1,
FM2, FM3 for FM or MW/LW) is displayed.
3 To perform manual tuning, briefly
touch c or d.
# You can also perform manual tuning by press-
ing c or d (TRK).
4 To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the key.
# You can also perform seek tuning by pressing
and holding c or d (TRK).
Radio
En
16
Section
05