01 controls and displays, Front panel, Controls and displays – Pioneer VSX-529-K User Manual
Page 9
1
1
Chapter
9
4
58
9
Controls and displays
Front panel
1
INPUT SELECTOR
dial
Selects an input source (
page 26
).
2
SPEAKERS
See
Making cable connections on page 16
.
The Speaker System setting may or may not be displayed,
depending on the input source you have selected.
3
MCACC indicator
Lights when Acoustic Calibration EQ (
page 38
) is on (Acoustic
Calibration EQ is automatically set to on after the Auto
MCACC setup (
page 24
)).
4
Receiver control buttons
DIMMER
– Dims or brightens the display. The brightness
can be controlled in four steps.
STATUS
– Switches the display of this unit. The listening
mode, input format, sound volume, input name can be
checked by selecting an input source.
The Input format may or may not be displayed, depending
on the input source you have selected.
5
Character display
See
Display on page 10
.
6
Tuner control buttons
BAND
– Switches between AM, FM ST (stereo) and FM
MONO radio bands (
page 35
).
TUNER EDIT
– Use with
TUNE
/
,
PRESET
/
and
ENTER
to memorize and name stations for recall
(
page 35
).
TUNE
/
– Used to find radio frequencies (
page 35
).
PRESET
/
– Use to select preset radio stations
(
page 35
).
7
HDMI indicator
Blinks when connecting an HDMI-equipped component;
lights when the component is connected (
page 18
).
8
iPod iPhone indicator
Lights when an iPod/iPhone is connected and iPod/USB
input is selected (
page 28
).
9
Remote sensor
Receives the signals from the remote control (see
Operating
range of remote control on page 13
).
10
MASTER VOLUME
dial
11
STANDBY/ON
12
PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers. The
listening mode when the sound is heard from the headphone
can be selected only from PHONES SURR, STEREO or
STEREO ALC
mode (S.R AIR mode can be also selected with
ADAPTER
input).
13
MCACC SETUP MIC jack
Use to connect a microphone when performing Auto MCACC
setup (
page 24
).
14
Listening mode buttons
AUTO SURROUND/STREAM DIRECT
– Switches between
Auto surround mode (
page 37
) and Stream Direct
playback (
page 38
).
ALC/STANDARD SURR
– Press for standard decoding
and to switch between the modes of
Pro Logic II and
NEO:6, and the Auto level control stereo mode (
page 37
).
ADVANCED SURROUND
– Switches between the various
surround modes (
page 38
).
5
6
7
11
12
15
14
17
18
13
3
2
1
8
10
4
9
16
19
20
21
22
23
21
26
27
28
29
29
30
24
25
VSX-824