Pioneer VSX-529-K - Manual (Page 11)

Controls and displays 1 1
11
4
58
9
Remote control
• The following buttons are not used with this receiver:
-
1 SLEEP
Press to change the amount of time before the receiver
switches into standby (30 min – 60 min – 90 min – Off). You
can check the remaining sleep time at any time by pressing
SLEEP once.
2  STANDBY/ON
Switches the receiver between standby and on.
3 RECEIVER CTRL
Switches the remote to control the receiver. Also use this
button to set up HOME MENU ( page 52 ) or Audio parameters
( page 39 ).
4 SIGNAL SEL S.SEL
Press to select the audio input signal of the component to play
back ( page 26 ).
5 Input function buttons
Use to select the input source to this receiver ( page 26 ). Also
switch the remote control mode when operating other device
and various inputs ( TUNER , etc.).
6 Listening mode buttons
AUTO – Switches between Auto surround mode ( page 37 )
and Stream Direct playback ( page 38 ).
SURR – Press for standard decoding and to switch
between the modes of Pro Logic II and NEO:6, and the
Auto level control stereo mode ( page 37 ).
ADV – Switches between the various surround modes
( page 38 ).
7 Receiver and component control buttons
The following button controls can be accessed after you have
selected the corresponding input function button ( BD , DVD ,
etc.).
Press
RECEIVER first to access:
AUDIO P. – Use to access the Audio options ( page 39 ).
HOME MENU – Press to access the Home Menu
( page 52 ).
RETURN – Confirm and exit the current menu screen.
Press BD and DVD first to access:
TOP MENU – Displays the disc ‘top’ menu of a Blu-ray
Disc/DVD.
HOME MENU – Displays the HOME MENU screen.
RETURN – Confirm and exit the current menu screen.
MENU – Displays the TOOLS menu of Blu-ray Disc player.
Press TUNER first to access:
TOOLS – Memorizes stations for recall ( page 35 ), also
used to change the name ( page 35 ).
BAND – Switches between AM, FM ST (stereo) and FM
MONO radio bands ( page 35 ).
Press iPod USB first to access:
HOME MENU – Switches between the iPod controls and
the receiver controls ( page 28 ).
8 /// , ENTER
Use the arrow buttons when setting up your surround sound
system ( page 52 ). Also used to control Blu-ray Disc/DVD
menus/options.
9 Component control buttons
The main buttons (  ,  , etc.) are used to control a component
after you have selected it using the input function buttons.
The
BD , DVD , and CD operation using the component control
buttons are limited only to Pioneer components.
The controls above these buttons can be accessed after you
have selected the corresponding input function button ( BD ,
DVD and CD ). These buttons also function as described
below.
Press
TUNER first to access:
Use TUNE +/– can be used to find radio frequencies and
PRESET +/– can be used to select preset radio stations
( page 35 ).
PTY – Use to search for RDS program types ( page 36 ).
10 SUB TITLE
The subtitle will be switched for BD and DVD.
CD
, NETWORK, iPod/USB, MHL, and BT (ADPT) will be
random playback.
11 POP UP
Popup menu will be displayed for BD.
SLEEP
INPUT
MUTE
CTRL
BD
AUTO SURR ADV
DVD
iPod
TUN
GAME
SAT
CD
TV
HDMI
MHL
BT
NET
S.SEL ECO
STANDBY/ON
ENTER
CLR
SB CH CH SEL
SP-A/B
Fav
RETURN
AUDIO P.
TOP
MENU
HOME
MENU
RECEIVER
RECEIVER SIGNAL SEL
SOURCE
TOOLS
MENU
SHIFT
BASS BASS TRE TRE
1
2
13
14
15
16
17
18
19
20
3
4
5
6
7
8
9
10
11
12
SHIFT