Pioneer AVD-W7900 - Manual (Page 10)

# If you do not operate the function within about
eight seconds, the display is automatically re-
turned.
Selecting the video format
When this unit is connected to an AV equip-
ment, you need to adjust the video format sui-
table to that AV equipment.
1 Press WIDE/MENU and hold to display
the setup menu.
BRIGHTNESS appears on the display.
2 Press WIDE/MENU to display
COLOR SYSTEM.
Press
WIDE/MENU repeatedly to switch be-
tween the following adjustment functions:
BRIGHTNESS (brightness)
—CONTRAST (con-
trast)
—COLOR (color)—HUE (hue)—
COLOR SYSTEM (color system) —Exit from
the setup menu
3 Press c or d to select the desired video
format.
Each press of c or d selects the video format
in the following order:
AUTO
—PAL—PAL-M—SECAM—NTSC
# If AUTO is selected, NTSC, PAL, PAL-M and
SECAM are automatically identified and dis-
played.
# Broadcast reception may be inferior when
AUTO is selected.
# If you do not operate the function within about
eight seconds, the display is automatically re-
turned.
Operating this unit
En
10
Section
03