Use only the furnished accessory usb cable, Connections – Pioneer MEP-7000 User Manual

Page 17

Text mode
Original mode

CONNECTIONS

English

5. Connecting a computer

Make these connections in order to use the accessory DJS or other DJ software program.

6. Connecting the power cord

When all other connections have been completed, connect one end of the accessory power cord to the AC IN jack on the rear side of
the drive unit, and the other end to a normal AC power outlet, or the auxiliary power outlet of an amplifier.

NOTE

• Use only the furnished accessory USB cable.

Drive unit

Computer

Accessory
USB cable

Do not connect until you have installed the required driver
in your computer. See “ABOUT THE DRIVER PROGRAM”
(P.49).

MEP-7000_WY_EN.book 17 ページ２００９年２月１２日　木曜日　午後８時２１分