Pioneer AVIC900HVT - Manual (Page 17)

CAUTION
• Install with the left and right sides of the DVD Navigation Unit perpendicular
or parallel to your vehicle’s direction of travel. Do not install diagonally to your
vehicle’s direction of travel or the current location will be displayed incorrectly.
• If you install the left and right sides of the DVD Navigation Unit parallel to
your vehicle’s direction of travel, switch the installation direction lever, and
attach the locking screw to the “
↔ ” side, or else the G sensor mounted in the
DVD Navigation Unit will not operate correctly.
If you install with the left and right sides of the DVD Navigation Unit parallel to
your vehicle’s forward / backward direction
If you install with the left and right sides of the DVD Navigation Unit parallel to your
vehicle’s forward / backward direction, remove the mounting screw underneath the DVD
Navigation Unit, and switch the installation direction lever. Then change the screw mount-
ing position from “
↔” side to “↕” side. If the screw is attached to the “↔” side, the G sen-
sor mounted in the DVD Navigation Unit will not operate correctly.
1. Remove the locking screw attached to the installation direction lever.
2. Switch the lever, and attach the mounting screw to the “
↔” side.
Locking screw
Installation direction lever
Underneath the DVD Navigation Unit
Locking screw
Installation direction lever
Front
Front Front
Front
Front
(Perpendicular)
Attachment
position of the
locking screw
↕
(Parallel)
Attachment
position of the
locking screw
↔
Forward / Backward
direction of vehicle Forward / Backward
direction of vehicle Forward / Backward
direction of vehicle
16
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
ENG/MASTER 96 17
CRD3803A_inst_001_029_UK 4/1/03 2:22 PM Page 17