Pioneer X-SMC55DAB-S - Manual (Page 41)

Additional information 14
41
En
Network
Problem Check Remedy
Cannot access to the
network.
The LAN cable is not firmly
connected.
Firmly connect the LAN cable (page 12).
The router is not switched on. Switch on the router.
Is the network type correctly set up? If set to Auto, the network connection is switched to wired or
wireless depending on whether the unit is connected to a LAN
cable when the power is turned ON.
Cannot access to the
component or computer
connected via network.
Internet security software is currently
installed in the connected
component.
There are cases where a component with Internet security software
installed cannot be accessed.
The audio component on the network
which has been switched off is
switched on.
Switch on the audio component on the network before switching on
this unit.
The component connected to the
network is not properly set.
If the client is automatically authorized, you need to enter the
corresponding information again. Check whether the connection
status is set to “Do not authorize”.
There are no playable audio files on
the component connected to the
network.
Check the audio files stored on the component connected to the
network.
Playback does not start. The component is currently
disconnected from this unit or the
power supply.
Check whether the component is properly connected to this unit or
the power supply.
The computer or Internet
Radio is not properly
operated.
The corresponding IP address is not
properly set.
Switch on the built-in DHCP server function of your router, or set up
the network manually according to your network environment
(page 24).
The IP address is being automatically
configured.
The automatic configuration process takes time. Please wait.
The audio files stored on
components on the network,
such as a computer, cannot
be played back.
Windows Media Player 11 or
Windows Media Player 12 is not
currently installed on your PC.
Install Windows Media Player 11 or Windows Media Player 12 on
your PC (page 32).
Audio files were recorded in formats
other than MP3, WAV (LPCM only),
MPEG-4 AAC, FLAC, WMA, AIFF, and
ALAC.
Play back audio files recorded in MP3, WAV (LPCM only), MPEG-4
AAC, FLAC, WMA, AIFF, or ALAC. Note that some audio files
recorded in these formats may not be played back on this unit.
Audio files recorded in MPEG-4 AAC
or FLAC are being played back on
Windows Media Player 11 or
Windows Media Player 12.
Audio files recorded in MPEG-4 AAC or FLAC cannot be played
back on Windows Media Player 11 or Windows Media Player 12. Try
using another server. Refer to the operation manual supplied with
your server.
The component connected to the
network is not properly operated.
Check whether the component is affected by special
circumstances or is in the sleep mode. Try rebooting the
component if necessary.
The component connected to the
network does not permit file sharing.
Try changing the settings for the component connected to the
network.
The folder stored on the component
connected to the network has been
deleted or damaged.
Check the folder stored on the component connected to the
network.
Network connections could be
restricted due to the computer’s
network settings, security settings,
etc.
Check the computer’s network settings, security settings, etc.
X-SMC55DAB-S_VXE8_En.book 41 ページ ２０１３年７月３０日 火曜日 午前９時４分