Pioneer X-SMC55DAB-S - Manual (Page 32)

Music server 10
32
En
Chapter 10:
Music server
Installation of the Pioneer Control Application (ControlApp) is
required in order to use all of the Music server functions.
Consult the following website:
When using iPhone/iPod touch
http://pioneer.jp/support/soft/iapp_controlapp/en.html
When using Android
http://pioneer.jp/support/soft/aapp_controlapp/en.html
For details, Installing ControlApp and Using ControlApp on
page 31.
This unit can play audio files stored on computers or other
components on a Local Area Network (LAN).
Introduction
This unit allows you to listen to audio files on a computer or
other component connected to the unit via LAN interface.
This chapter describes the setup and playback procedures
required to enjoy these features. It is advisory that you also
refer to the operation manual supplied with your network
component.
Note
• Photo or video files cannot be played back.
Playing music on Music server
1 Connect this unit and your mobile device to
a network.
The Music server function cannot be used when using a
wireless Direct connection.
2 Start ControlApp.
3 Tap the Music Server.
4 Tap the playback control.
Audio playback will begin.
Note
• When listening to music with Music server, the following
remote control buttons will be disabled: / (play/
pause),  (prev), and  (next)
• Buttons remaining enabled on this unit and its remote
control include STANDBY/ON, INPUT, and VOLUME –
/+
(VOLUME –/+).
• If no play back and no operation has done for 20 minutes
or more, the unit turns off automatically.
• Auto power off can be switched to ON/OFF (page 52).
About playable DLNA network devices
This unit allows you to play music on media servers
connected on an identical Local Area Network (LAN) as the
unit. This unit allows you to play files stored on the following
devices:
• PCs running Microsoft Windows Vista or XP Service
Pack 3 with Windows Media Player 11 installed
• PCs running Microsoft Windows 7 with Windows Media
Player 12 installed
• DLNA-compatible digital media servers (on computers
or other components)
Files stored in a computer or DMS (Digital Media Server) as
described above can be played via command from an external
Digital Media Controller (DMC). Devices controlled by this
DMC to play files are called DMRs (Digital Media Renderers).
This unit supports this DMR function.
When this unit is selected as a DMR and DMS playback is
begun, the unit’s input automatically switches to DMR. When
in the DMR mode, such operations as playing and stopping
files can be performed from the external controller. Volume
adjustment and the muting control are also possible.
Important
• You cannot access a computer on a network while you
are logged onto a domain that is configured in a
Windows network environment. Instead of logging onto
the domain, log onto the local machine.
• There are cases where the time elapsed may not be
correctly displayed.
Note
• Depending on the external controller being used,
playback may be interrupted when the volume is
adjusted from the controller. In this case, adjust the
volume from the unit or remote control.
X-SMC55DAB-S_VXE8_En.book 32 ページ ２０１３年７月３０日 火曜日 午前９時４分