Pioneer PDP-435FDE - Manual (Page 35)

10 Useful Adjustment Settings
English
35
En
Adjusting image positions
Adjust the horizontal and vertical positions of images on the
Plasma Display.
1 Press HOME MENU.
2 Select “Option” ( / then ENTER).
3 Select “Position” ( / then ENTER).
4 Select “H/V Position Adjust” ( / then ENTER).
Position
H/V Position Adjust
Reset
5 Adjust the vertical position ( / ) or the horizontal
position ( / ) .
6 Press HOME MENU to exit the menu.
• To restore the factory defaults for all items, press / to
select “Reset” in step 4, and then press ENTER. A confir-
mation screen appears. Press / to select “Yes”, and
then press ENTER.
• Adjustments are stored separately according to input
source.
Selecting an input signal type
After connecting to the INPUT 1, INPUT 2, or INPUT 3
terminal, specify the type of video signals to be received from
the connected equipment. For the type of the signals, see the
operation manual that came with the connected equipment.
Before starting the menu, press INPUT 1, INPUT 2, or
INPUT 3 on the remote control unit or press
INPUT on the Plasma Display to select an input source.
1 Press HOME MENU.
2 Select “Option” ( / then ENTER).
3 Select “Input Select” ( / then ENTER).
4 Select a signal type ( / then ENTER).
• For INPUT1, you can select Video or RGB.
• For INPUT2, you can select Video or S-Video or
COMPONENT.
• For INPUT3, you can select Video, S-Video, RGB.
5 Press HOME MENU to exit the menu.
• If no image appears or images appear in inappropriate
colours, specify another video signal type.
• For the signal types to be specified, check the operation
manual that came with the connected equipment.
Colour system setting
If an image does not appear clearly, select another colour
system (e.g., PAL, NTSC).
1 Press HOME MENU.
2 Select “Option” ( / then ENTER).
3 Select “Colour System” ( / then ENTER).
4 Select a video signal system ( / then ENTER).
Colour System
Auto
PAL
SECAM
NTSC
4.43NTSC
• You can select “Auto”, “PAL”, “SECAM”, “NTSC”, or
“4.43NTSC”.
• With “Auto” selected, input signals are automatically
identified.
5 Press HOME MENU to exit the menu.
• The factory default is “Auto”.
• You need to perform colour system setting for each of
INPUT 1 to 4.
• For colour system setting for each channel, see pages 27
and 28.
Input Select
Video
S-Video
RGB
COMPONENT