Pioneer SC-LX78-K - Manual (Page 48)

48
Basic Setup
04
How to use the built-in AVNavigator
The built-in AVNavigator is equipped with Wiring Navi, which allows you to perform connection of this receiver
and initial settings in interactive mode. By simply following the screen prompts to connect and set the unit, highly
accurate initial settings can be performed easily.
Additionally, in order to use various functions easily, contents linked to the receiver can be used.
Operating Environment
! AVNavigator can be used in the following environments.
— Windows PC: Microsoft ® Windows ® XP/Windows Vista ® /Windows ® 7/Windows ® 8/Windows ® 8.1
— Mac: Mac OS X (10.7, 10.8 or 10.9)
— iPad/iPhone/iPod touch: iOS 7
— Android device: Android 4.0.4, 4.1.1, 4.1.2, 4.2, 4.2.2, 4.4.2
! AVNavigator uses an Internet browser. The following browsers are supported:
— Windows PC: Internet Explorer ® 8, 9, 10, 11
— Mac/iPad/iPhone/iPod touch: Safari 6.0
— Android device: Android browser
! Depending on the computer network setting or security setting, AVNavigator may not operate.
Using AVNavigator
Important
! Connect the LAN terminal to the network ( page 43 ).
1 Press u STANDBY/ON to switch on the receiver and your computer.
2 Launch AVNavigator.
Operate AVNavigator by following the screen prompts of your computer, etc.
! If using a Windows PC, complete the below steps to start up.
1 Start up Internet Explorer on your PC (open any random Internet page).
2 Press STATUS on the remote control and check the front panel display on the receiver (the IP address of
the receiver will appear).
(Example Text Display)
If 0.0.0.0 or 169.254.112.202 appears in the address, it indicates that the receiver is not connected to the
network. Check to make sure that the receiver and router are properly connected.
3 Enter number in 2 above in the field in Internet Explorer shown below and then press the ENTER key.
(Example Input Format) 192.168.0.124
! With a Windows PC other than Windows XP, you can use the following method to launch AVNavigator.
Launch Explorer and right-click or displayed in the ‘Network’ folder, then click
‘View device webpage’.
! On a Mac, launch Safari and click or displayed in ‘Bonjour’ on the Bookmarks bar.
— If ‘Bonjour’ is not displayed, tick the ‘Include Bonjour in the Favorites bar’ check box on the
‘Advanced’ tab in the Safari ‘Preferences...’ menu.