11 using the timer, Setting the clock, Setting the wake-up timer – Pioneer XW-NAV1-K User Manual
Page 29: Using the timer, Using the timer 11, Chapter 11
Using the timer
11
29
En
English
Français
Español
Chapter 11:
Using the timer
Setting the clock
Setting the clock allows you to use the timer.
1
• Default setting:
1
With the power turned ON, press
TIMER/CLOCK.
The current time is displayed on the front panel
display.
2
Press
TIMER/CLOCK again.
‘
’ is displayed on the front panel
display.
3
Press ENTER.
The hour blinks on the front panel display.
• When the clock is not set, ‘
’ is
displayed on the front panel display.
4
Use
/ to set the hour, then press
ENTER.
The minute blinks on the front panel display.
5
Use
/ to set the minute, then press
ENTER.
The newly set value displays for 5 seconds, and
then the setting is completed.
Setting the wake-up timer
1
With the power turned ON, press
TIMER/CLOCK.
The current time is displayed on the front panel
display.
2
Press
TIMER/CLOCK twice.
‘
’ is displayed on the front panel
display.
3
Press ENTER.
The hour blinks on the front panel display.
• When the wake-up timer is not set,
‘
’ is displayed on the front panel
display.
4
Use
/ to set the hour, then press
ENTER.
The minute blinks on the front panel display.
5
Use
/ to set the minute, then press
ENTER.
Note
1 You’ll need to set the clock again if you unplug the unit (or in case of a power failure).
XW-NAV1_VXZT5.book 29 ページ ２０１０年５月１４日 金曜日 午前１０時３８分