Pioneer XW-NAV1-K - Manual (Page 10)

Connections 02
10
En
Audio signals that can be output
from this unit’s HDMI OUT
terminal
• 44.1 kHz to 96 kHz, 16-bit/ 20-bit/ 24-bit 2-
channel linear PCM audio (including 2-
channel downmixing)
• Dolby Digital 5.1-channel audio
• DTS 5.1-channel audio
• MPEG audio
• Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
Plugging in
After you’ve finished making all connections,
plug the unit into an AC outlet.
1 Plug the supplied power cord into the AC
IN socket on the back of the unit.
2 Plug the other end into a power outlet.
Important
• Before making or changing any
connections, switch off the power and
disconnect the power cord from the AC
outlet.
XW-NAV1_VXZT5.book 10 ページ ２０１０年５月１４日 金曜日 午前１０時３８分