Pioneer VSX-921 - Manual (Page 31)

En 31
05 Basic playback
Searching for RDS programs
One of the most useful features of RDS is the
ability to search for a particular kind of radio
program. You can search for any of the program
types listed above.
1 Press TUNER to select the FM band.
! RDS is only possible in the FM band.
2 Press PTY SEARCH.
PTY SEARCH shows in the display.
3 Press PRESET k/l to select the
program type you want to hear.
4 Press ENTER to search for the program
type.
The system starts searching through all fre-
quencies for a match. When it finds one, the
search stops and the station plays for five
seconds.
5 If you want to keep listening to the
station, press ENTER within the five
seconds.
If you don’t press ENTER, searching resumes.
If NO PTY is displayed it means the tuner
couldn’t find that program type at the time of
the search.
! RDS searches all frequencies. If the program
type could not be found among all the
frequencies, NO PTY is displayed.
Displaying RDS information
Use the DISP button to display the different
types of RDS information available.
! If any noise is picked up while displaying the
RT scroll, some characters may be displayed
incorrectly.
! If you see NO RT DATA in the RT display, it
means no RT data is sent from the broadcast
station.
! If you see NO PS DATA in the PS display, it
means no PS data can be received.
! If you see NO PTY DATA in the PTY display, it
means no PTY data can be received.
% Press DISP for RDS information.
Each press changes the display as follows:
! Radio Text (RT) – Messages sent by the radio
station. For example, a talk radio station may
provide a phone number as RT.
! Program Service Name (PS) – The name of the
radio station.
! Program Type (PTY) – This indicates the kind
of program currently being broadcast.
! Current tuner frequency.
Bluetooth ADAPTER for
Wireless Enjoyment of Music
This receiver
Remote control
operation
Music data Bluetooth ®
ADAPTER
Bluetooth
wireless
technology
enabled device:
cell phone Bluetooth wireless
technology
enabled device:
Digital music
player
Device not
equipped with
Bluetooth wireless
technology:
Digital music
player
+
Bluetooth audio
transmitter
(sold commercially)
MASTER VOLUME
STANDBY/ON
INPUT SELECTOR
PUSH OPEN
iPod iPhone iPad DIRECT CONTROL SOUND RETRIEVER AIR ADVANCED SURROUND STANDARD SURROUND AUTO SURR/ALC/ STREAM DIRECT
PHONES
SPEAKERS CONTROL – MULTI-ZONE – ON/OFF BAND TUNER EDIT TUNE PRESET ENTER
iPod iPhone iPad HDMI ADVANCED MCACC FL OFF
Wireless music play
When the Bluetooth ADAPTER (AS-BT100 or
AS-BT200) is connected to this unit, a product
equipped with Bluetooth wireless technology
(portable cell phone, digital music player, etc.)
can be used to listen to music wirelessly. Also,
by using a commercially available transmit-
ter supporting Bluetooth wireless technol-
ogy, you can listen to music on a device not
equipped with Bluetooth wireless technology.
The AS-BT100 and AS-BT200 models supports
SCMS-T contents protection, so music can also
be enjoyed on devices equipped with SCMS-T
type Bluetooth wireless technology.
Remote control operation
The remote control supplied with this unit
allows you to play and stop media, and perform
other operations.
! It must be necessary that the Bluetooth
wireless technology enabled device supports
AVRCP profiles.
! Remote control operations cannot be
guaranteed for all Bluetooth wireless
technology enabled devices.
Pairing the Bluetooth ADAPTER
and Bluetooth wireless
technology device
“Pairing” must be done before you start play-
back of Bluetooth wireless technology content
using the Bluetooth ADAPTER. Make sure to
perform pairing the first time you operate the
system or any time pairing data is cleared.
The pairing step is necessary to register the
Bluetooth wireless technology device to enable
Bluetooth communications. For more details,
see also the operating instructions of your
Bluetooth wireless technology device.
! Pairing is required when you first use the
Bluetooth wireless technology device and
Bluetooth ADAPTER.
! To enable Bluetooth communication, pairing
should be done with both your system and
Bluetooth wireless technology device.
! If the Bluetooth wireless technology device’s
security code is “0000”, there is no need to
make the security code setting on the receiver.
Press ADPT to set the ADAPTER PORT
input, then conduct the pairing operation on
the Bluetooth wireless technology device.
If pairing is successful, there is no need to
performing the pairing operation below.