Brocade Mobility RFS6000 Controller Installation Guide - Manual (Page 16)

System status LEDs
3
8 Brocade Mobility RFS6000 Controller Installation Guide
53-1001573-03
Start up / POST (primary system or redundant system)
NOTE
During controller start up, the Temperature status LED will be lit Solid Amber. This is
normal behavior and does not indicate an error. At the completion of start up the
Temperature Status LED will controller to Solid Green.
System status 1 LED System status 2 LED Event
Off Off Power off
Green Blinking Green Blinking Power On Self Test (POST) running
Green Solid Green Blinking POST succeeded (Operating
System Loading)
Green Solid Off POST succeeded (Normal
Operation)
Amber Blinking Off POST Failure
Alternating Green Blinking
& Amber Blinking Alternating Green Blinking
& Amber Blinking Boot Up Error: Device has an
invalid checksum