Olympus FE-5035 - Manual (Page 12)

12 EN
Installing the computer software (ib)
For information on using the computer
software (ib), see the software’s online help.
1
Insert the supplied CD in a CD-ROM
drive.
A setup screen will appear on the computer
monitor.
If the setup window is not displayed,
select “My Computer” (Windows XP) or
“Computer” (Windows Vista/Windows 7)
from the start menu. Double-click the
icon for the CD-ROM drive to open the
setup CD window and then double-click
“CameraInitialSetup.exe”.
2
Connect the camera to the
computer.
If nothing is displayed in the camera monitor
when the camera is connected, the battery
may be exhausted. Disconnect the camera
from the computer and charge the battery.
(p. 10)
3
Follow the on-screen instructions
on your computer.
Operation guide
Operation guides displayed at the bottom of the
screen indicate that the
m button, H button,
or zoom buttons should be used.
MENU OK
SEL. IMAGE
ERASE/CANCEL
Operation guide
OK SET
1
2
3
FINE ZOOM OFF
R OFF
ICON GUIDE ON
AF MODE FACE/iESP
COMPRESSION NORMAL
MENU OK SET EXIT
●
Installing the supplied
computer software (ib)
After checking the system requirements, follow
the instructions below to connect the camera to
a computer and install the supplied computer
software (ib).
System requirements
Windows XP (Service Pack 2 or later)/
Windows Vista/Windows 7
Connecting the camera
Multi-connector
USB cable (supplied)
Computer
(on and running)