Olympus SP-820UZ - Manual (Page 41)

41 EN
Saving battery power between shots Saving battery power between shots
dd [Power Save] [Power Save]
Submenu 2 Application
Off Cancels [Power Save].
On
When the camera is not being used
for approx. 10 seconds, the monitor
automatically turns off to save battery
power.
To resume standby mode To resume standby mode
Press any button.
Changing the display language Changing the display language dd [ [l l]]
Submenu 2 Application
Languages
The language for the menus and
error messages displayed on the
monitor is selected.
Setting the date and time Setting the date and time dd [ [ X X]]
Set date and time Set date and time
1 Use FG to select the year for [Y].
2 Press I to save the setting for [Y].
3 As in Steps 1 and 2, use FGHI to set [M]
(month), [D] (day), [Time] (hours and minutes), and
[Y/M/D] (date order), and then press the
A button.
For precise time setting, press the A button as the
time signal strikes 00 seconds.
To select the date display order To select the date display order
1 Press I after setting Minute, and use FG to select
the date display order.
Date order
X MENU Back
Y/M/D
Y M D Time
: . .
2012 10 26 12 30
2 Press the A button to set.
To check the date and time To check the date and time
Press the INFO button while the camera is turned off. The
current time is displayed for approx. 3 seconds.