Olympus DS-5000 - Manual (Page 24)

24
1
Setting Recording Destination (Card Select)
Setting Recor
ding Destination
By default, the recording destination is set to
the [SD Card] at the factory. To change the
recording destination, follow the procedure
outlined below.
1 Select [Card Select] at the [Device Menu]
screen and press
OK/MENU or 9
button.
Refer to P.36 regarding each menu item settings.
2 Press the
+
or
–
button to choose
between [SD] and [micro SD].
3 Press the OK/MENU button to
complete the setup screen.
[SD Card Selected] or [microSD Card Selected]
will light up on the display, and it will return to the
[Device Menu] screen.
If the 0 or F1(BACK) is pressed, the setting
will be cancelled and it will return to the [Device
Menu] screen.
The recording destination (
or ) that was
set will appear on the display.
4 Press F1(BACK) or 0 button to return
to the [Main Menu] screen, then press
F1(BACK) or 0 button again to exit
the setting.
BACK EXIT
Device Menu
Fingerprint
12
Card Select
Beep
Format
USB Class
Time & Date
BACK EXIT
Card Select
SD
microSD Card
Selected
mSD
BACK EXIT
Card Select
SD
micro SD mSD
025
/ 030
FOLDER PRIOR INFO
MIKE
E
QP DICT
New File 02
M
10
s
3 H 08 M 05 s
F1 button
OK/MENU,
+
,
–
,
9, 0 button