Olympus DS-5000 - Manual (Page 23)

23
1
Setting Time/Date
1 M 14 D 2008 Y
14 D 1 M 2008 Y
2008 Y 1 M 14 D
• You can choose the order of the year, month,
day by pressing the F2(D/M/Y or Y/M/D or M/
D/Y)* button while setting them.
Example: January 14, 2008
(Initial setting)
*The display will vary depending on the status of the
settings.
3 Press the OK/MENU button to
complete the setup screen.
The clock will start from the set date and time.
Press the OK/MENU button according to the time
signal. BACK EXIT
Device Menu
USB Class
12
Time & Date
Power Save
Reset Settings
Card Info.
System Info.
Changing the Time/Date
When the recorder’s POWER switch is turned
ON the [Time & Date] will be displayed for two
seconds. If the [Time & Date] is not correct,
set it using the procedure below.
1 Press the
+
or
–
button in the menu
screen, and select the [Time & Date].
See P.36, 38 regarding the menu.
2 Press the OK/MENU or 9 button.
The Time/Date screen appears. The hour
indicator flashes, indicating the start of the Time/
Date setup process.The following steps are the
same as Step 1 through Step 3 of “Setting Time/
Date (Time & Date)” (
☞ P.22).
3 Press F1(BACK) or 0 button to return
to the [Main Menu] screen, then press
F1(BACK) or 0 button again to exit
the setting.
Setting Time/Date (Time & Date)
Notes
• If the slide switch is moved to a position other than
STOP while setting the Time/Date, the Time/Date
currently being set (un-finalized Time/Date) will be
cancelled and it will revert to the previously set Time/
Date.
• You can set the time and date from your PC using DSS
Player software ( ☞ P.55).