Olympus µ TOUGH-6010 - Manual (Page 18)

18 EN
“Important information about water and
shock resistant features” (p. 65)
To lock the focus distance for
underwater shoots (AF lock)
When [ T UNDERWATER SNAPSHOT],
[k UNDERWATER WIDE1], or,
[H UNDERWATER MACRO] is selected,
press B.
AFL
12 M
4
IN N
ORM
^ mark
To cancel, press B again to clear the
^ mark.
Enhancing skin tone and
texture (b mode)
The camera fi nds a person’s face and gives the
skin a smooth, translucent look for taking the
picture.
1
Set the mode dial to b.
12 M
4
IN N
ORM
b mode indicator
This section describes the available shooting
modes. Depending on the mode, some settings
can be changed. For details on the functions
that can be adjusted, see “Menus for Shooting
Functions” on page 27.
Using the best mode for the
shooting scene (s mode)
1
Set the mode dial to s.
PORTRAIT
SET OK MENU EXIT
An explanation of the selected mode is displayed
while the
E button is pressed and held.
2
Use AB to select the best
shooting mode for the scene, and
press the
o button.
12 M
4
IN
N
ORM
Icon indicating
the scene mode
that is set
To change to another scene mode, use the
menu. [O s] (p. 31)
To take underwater photos
Select [ T UNDERWATER SNAPSHOT],
[k UNDERWATER WIDE1],
[l UNDERWATER WIDE2] *1 ,
[H UNDERWATER MACRO].
*1 When set to [l UNDERWATER WIDE2],
the focus distance is automatically fi xed to
approx. 5.0 m (16.4 ft.).
Be sure to use an underwater case when
using the camera at depths exceeding 3 m
(9.8 ft.).
●
Using Shooting Modes