Olympus DS7000 - Manual (Page 38)

38
3
EN
Menu items
b
a
c
Me
n
u
it
e
m
s
LCD/Sound Menu
Backlight
By default, the display will remain lit for about
10 seconds when a button on the recorder is pressed.
1 Select [ Lighting Time ], [ Dim Light Time ]
or [ Brightness ].
2 Select the options.
When [Lighting Time] is selected:
[ 5seconds ] [ 10seconds ] [ 30seconds ] [ 1minute ]:
Set the backlight duration.
When [Dim Light Time] is selected:
[ 30seconds ] [ 1minute ] [ 2minutes ] [ 5minutes ]
[ Always On ]:
Set the time after which the backlight dims.
When [Brightness] is selected:
[ 01 ] [ 02 ] [ 03 ]:
Sets the brightness of the backlight when lit.
LED
You can set it so the record indicator light does not
turn on.
[ On ]:
LED light will be set.
[ Off ]:
LED light will be canceled.
Beep
When the Beep is set to [ On ], the recorder will beep
in case of error.
[ On ]:
Beep is enabled.
[ Off ]:
Beep is disabled.
Language (Lang)
You can set the language for the recorder’s user
interface.
[ Čeština ] [ Dansk ] [ Deutsch ] [ English ] [ Español ]
[ Français ] [ Nederlands ] [ Polski ] [ Русский ]
[ Svenska ]:
• The languages available may vary depending
on the country/region where the product is
purchased.
Adjust the start/stop actuation level:
While the recorder is in recording mode,
press the
9
or
0
button to adjust the
actuation level.
• The VCVA level can be set to any of 15 different
values.
• The higher the value is, the more sensitive the
recorder can react to sounds. At the highest value,
even the faintest sound will activate recording.
• The VCVA actuation level can be adjusted
according to the ambient (background) noise.
C Start level (moves to the
right/left according to the
set level)
• The start/stop actuation level also varies
depending on the selected microphone
sensitivity mode (
☞ P.37).
• To ensure successful recordings, prior testing and
adjustment of the start/stop actuation level is
recommended.
a VCVA indicator
b Level meter (varies
according to the sound
volume being recorded)
• When the sound volume is lower than the
preset actuation sound level, recording
automatically stops after 1 second
approximately, and [ Standby ] flashes on
the display. The record indicator light turns
on when recording starts and flashes when
recording pauses.