27 en, Creating panoramic images ( p mode) – Olympus SH-21 User Manual
Page 27

27
EN
2
Use
HI to select the mode and then press
the
A button.
16
M
44
0.0
0.0
AUTO
WB
AUTO
WB
N
ORM
Pop Art
Pop Art
Icon indicating P mode
that is set
Shooting mode
Application
MAGIC FILTER
1
Pop Art
2
Pin Hole
3
Fish Eye
4
Drawing
*1
5
Soft Focus
6
Punk
7
Sparkle
8
Watercolor
9
Refl ection
0
Miniature
*1
Two images are saved, an unmodifi ed image and an
image to which the effect has been applied.
In P mode, the optimum shooting settings are pre-
programmed for each scene effect. For this reason,
some settings cannot be changed in some modes.
The selected effect is applied to the movie. The effect
may not be applied depending on the shooting mode.
Creating panoramic images (p mode)
1
Set the shooting mode to p.
2
Use
HI to select the mode. When selecting
[Auto], press
G
. When selecting other than
[Auto], press the
A button.
44
N
ORM
Auto
Auto
0.0
0.0
AUTO
WB
AUTO
WB
FULL
AUTO
AUTO
PC
PC
MANUAL
MANUAL
Submenu
Application
Auto
Panorama images are automatically
combined just by swinging the camera in
the shooting direction. Press the shutter
button once to begin the sequence.
Manual
Three frames are taken and combined
by the camera. The user composes
the shots using the guide frame and
manually releases the shutter.
PC
The frames that were taken are
combined into a panorama image using
the PC software.
3
When shooting with [Auto]
Use
HI to select the angle of view and then
press the
A button.
For details on installing the PC software, see “Setting
up using the supplied CD” (p. 15).
When set to [Auto] or [Manual], [Image Size]
(p. 38) is fi xed to 2MB or equivalent.
The focus, exposure, zoom position (p. 19), and white
balance (p. 32) are locked at the fi rst frame.
The fl ash (p. 20) is fi xed to
$ (Flash Off) mode.