Using shooting functions, Using the zoom, Using the flash – Olympus FE-360 User Manual
Page 19: Adjusting the brightness, 1 en, Adjusting the brightness (exposure compensation), Press the f button, Press the # button

1
EN
2
Use
mn to select the setting option,
and press the
B button to set.
Option
Description
FLASH AUTO
The flash fires automatically in
low-light or backlight conditions.
REDEYE
Pre-flashes are emitted to reduce
the occurrence of red eye in your
photos.
FILL IN
The flash fires regardless of the
available light.
FLASH OFF
The flash does not fire.
Adjusting the brightness
(Exposure compensation)
The standard brightness (appropriate exposure)
set by the camera based on the shooting mode
can be adjusted brighter or darker to obtain a
desired shot.
1
Press the F button.
0.0
+0.3
+0.7
+1.0
EXPOSURE COMP.
Exposure compensation value
2
Use
klmn to select the desired
brightness, and press the
B button.
Using the zoom
Pressing the zoom buttons adjusts the shooting
range.
Pressing the wide
(W) button
Pressing the telephoto
(T) button
8
M
P
4
IN
N
ORM
8
M
P
4
IN
N
ORM
Zoom bar
Optical zoom: 3x, digital zoom: 4x
Use of h mode
(p. 27) is recommended
when shooting with the telephoto zoom.
The zoom bar appearance identifies the
status of the digital zoom.
Digital zoom
range
When using
optical zoom and
digital zoom
Optical zoom
range
Using the flash
The flash functions can be selected to best
match the shooting conditions.
1
Press the # button.
P
OK
OK
AUTO
SET
FLASH AUTO
AUTO !
#
$
Using Shooting Functions