Inserting and removing the battery and card – Olympus XZ-2 User Manual
Page 5
5
EN
Preparations for shooting
1
Inserting and removing the battery and card
1
Follow Steps 1 and 2 to open the
battery/card compartment cover.
• Turn off the camera before opening the battery/
card compartment cover.
2
1
Battery/card compartment lock
Battery/card compartment cover
2
Insert the battery while sliding the battery
lock knob in the direction of the arrow.
• Insert the battery as illustrated with the l mark
toward the battery lock knob.
Damage to the battery exterior (scratches, etc.)
may produce heat or an explosion.
• Slide the battery lock knob in the direction of the
arrow to unlock, and then remove the battery.
Battery lock knob
3
Insert the card straight until it clicks into
place.
• Always use SD/SDHC/SDXC cards or Eye-Fi
card with this camera. Do not insert other types
of memory cards. “Cards compatible with this
camera” (P. 83)
• Do not touch the metallic parts of the card
directly.
Write-protect switch
To remove the card
Press the card in until it clicks and comes out
slightly, then remove the card.
4
Follow Steps 1 and 2 to close battery/
card compartment cover.
• When using the camera, be sure to close the
battery/card compartment cover.
2
1