Adding sound to still pictures, Erase selected pictures/erase all pictures, Erase by selecting the single-frame – Olympus 840 User Manual
Page 33: Men u operat ions, 7 erase, Sel. image, All erase

Men
u operat
ions
EN
33
Select a picture with
43, and use 12 to select [U+90°], [V0°], or [T-90°]. You can rotate
several frames in succession.
Sound is recorded for about 4 seconds.
• Select a picture with
43, and select [YES] with 12, then
press
e to begin recording.
• The [BUSY] bar will be temporarily displayed.
Protected pictures cannot be erased. Cancel protection before erasing protected pictures.
Once erased, pictures cannot be restored. Check each picture before erasing to avoid
accidentally erasing pictures you want to keep.
• When erasing the picture in the internal memory, do not insert the card into the camera.
• When erasing the picture from the card, insert a card into the camera in advance.
• You can confirm on the monitor whether the internal memory or card is being used.
g“Using the internal memory or card” (P.64)
• Use the arrow pad to select the picture, and press
e to add R.
• Press
e again to cancel the selection.
• When all individual pictures to be erased have been marked,
press
f/S.
• Select [YES], and press
e.
• Select [YES], and press
e.
R ............................................................................
Adding sound to still pictures
YES / NO
7 ERASE
Erase selected pictures/Erase all pictures
SEL. IMAGE....................................................
Erase by selecting the single-frame
ALL ERASE .........................
Erase all the pictures in the internal memory and the card
OK
EXIT
y
+90°
EXIT
OK
y
0°
-90°
EXIT
OK
y
MENU
BACK
OK
SET
YES
NO
R
1
4
2
5
3
6
OK
S
MENU
BACK
GO
SEL. IMAGE
IN
e card