Olympus E-PL1 - Manual (Page 76)

76 EN
Customizing camera settings
7
X K/COLOR/WB MENU c X
Option Description g
NOISE REDUCT. This function reduces the noise that is generated during
long exposures.
[AUTO]: Long exposure noise reduction activates
automatically at slow shutter speeds.
[ON]: Noise reduction is performed with every shot.
[OFF]: Noise reduction off.
When active, noise reduction approximately doubles
shooting times.
Noise reduction turns off automatically during
sequential shooting.
This function may not work effectively with some
shooting conditions or subjects.
•
•
•
P. 39
NOISE FILTER Choose the amount of noise reduction performed at
high ISO sensitivities.
—
WB Choose the white balance mode. P. 42
ALL > [ALL SET]: Use the same white balance compensation
in all modes except [CWB].
[ALL RESET]: Set white balance compensation for all
modes except [CWB] to 0.
P. 42
COLOR SPACE You can select how colors are reproduced on the
monitor or printer.
—
SHADING COMP. Choose [ON] to correct peripheral illumination according
to the type of lens. This is particularly effective with wide
angle lenses.
Compensation is not available for teleconverters or
extension tubes.
Noise may be visible at the edges of photographs
taken at high ISO sensitivities.
•
•
—
K SET The record mode for JPEG photographs can be
selected from four combinations of image size and
compression rate. The camera offers a choice of three
sizes and four compression rates for each combination.
You can also choose the pixel count for X- and W-size
images (P. 77).
Modifying JPEG record modes
1) Use HI to select
a combination
(K1–K4)
and use
FG to
change.
2) Press i.
K SET
PIXEL COUNT
Y
Y arge
SF F N SF X W W
1 2 3 4
BACK SET
Compression rate Number of pixels
P. 31
S0027_E.indb 76 S0027_E.indb 76 2009/12/21 14:53:10 2009/12/21 14:53:10