Olympus DS-3000 - Manual (Page 10)

10
Starting the Transcription Module
To start the Transcription Module, follow these steps:
Notes
- It is assumed that the DSS Player Pro Transcription Module has been installed. For installation
instructions, see Installing DSS Player Pro ( P.6).
- If you have a plan to use the foot switch or headset, see Connecting the RS23/RS24 Foot
Switch ( P.11) and Connecting the E102 Headset ( P.12).
(2) (3)
Start Windows. 1
Follow these steps: 2
(1) Click the "Start" button.
(2) Point to "Programs" and select "Olympus DSS Player Pro."
(3) Click "Transcription Module."
(1)
A dialog box for selecting the foot switch connection
method opens. 3
Select USB or Serial and click "OK."
Notes
- This dialog box opens only when the Transcription Module launches for
the first time, and does not appear again.
- The Transcription Module will launch automatically when you connect the DS-3000 to the USB
port or if you insert a SmartMedia PC Card Adapter into the PC. To disable automatic launching
of the Transcription Module, right-click on the taskbar and select "Do not detect
automatically."