Olympus STYLUS 7000 - Manual (Page 43)

43 EN
Printing
2
Turn on the printer, and then connect
the printer and camera.
O button
USB cable (supplied)
Multi-
connector
OK PC / CUSTOM PRINT
EASY PRINT START
Open the connector cover
in the direction of the arrow.
3
Press O to start printing.
4
To print another image, use NO
to select an image, and press the
E button.
To exit printing
After a selected image is displayed on the
screen, disconnect the USB cable from the
camera and printer.
PRINT EXIT OK
Direct printing (PictBridge *1 )
By connecting the camera to a PictBridge-
compatible printer, you can print images directly
without using a computer.
To fi nd out if your printer supports PictBridge, refer
to the printer’s instruction manual.
*1 PictBridge is a standard for connecting digital
cameras and printers of different makers and printing
out pictures directly.
The printing modes, paper sizes, and other
parameters that can be set with the camera
vary depending on the printer that is used. For
details, refer to the printer’s instruction manual.
For details on the available paper types,
loading paper, and installing ink cassettes,
refer to the printer’s instruction manual.
Printing images at the printer’s
standard settings [EASY PRINT]
1
Display the image to be printed on the
monitor.
“Viewing images” (p. 15)
Printing can also be started when the camera
is turned off. After performing Step 2, use LM
to select [EASY PRINT], press the E button.
Use NO to select an image, and press the E
button.
d4392_e_oima_000_book_cs2.indb 43 d4392_e_oima_000_book_cs2.indb 43 2008/12/09 17:06:35 2008/12/09 17:06:35