Olympus SP-590UZ - Manual (Page 57)

EN
Adjust the settings for the functions while referring to “Using the Menu” (p. 3).
Selecting the display units during manual focus [m/ft]
E
SETUP  m/ft
“Changing the focus method [FOCUS MODE]” (p. 34)
Submenu 2 Application
m This displays in meters and centimeters.
ft This displays in feet and inches.
Assigning functions to the z button [CUSTOM BUTTON]
E
SETUP  CUSTOM BUTTON
“Using a function assigned to the z button (Custom button)” (p. 26)
Submenu 2 Application
AE LOCK *1 /AF LOCK *2 /AF LOCK + AE LOCK *3 /
IMAGE SIZE (p. 29)/COMPRESSION (p. 29)/
FINE ZOOM (p. 33)/DIGITAL ZOOM (p. 33)/
AF MODE (p. 34)/FOCUS MODE (p.34)/
FULLTIME AF (p. 35)/AF PREDICT (p. 35)/
IMAGE STABILIZER (p. 35)/Q FLASH (p. 36)/
R (p. 37)/NOISE REDUCT. (p. 38)
The assigned function is called and set at the touch of
a button.
*1 This assigns the function that locks the exposure.
*2 This assigns the function that locks the focus position.
*3 This assigns the function that locks the exposure and focus position.
Saving battery power between shots [SLEEP]
E
SETUP  SLEEP
Submenu 2 Application
1MIN/3MIN/
5MIN/10MIN
When the camera is not being used, the monitor/viewfinder automatically turn off to save
battery power (sleep mode).
This selects and sets the time until sleep mode is activated.
When the camera is not being used for approx. 12 minutes in sleep mode, the camera automatically
turns off.
To cancel sleep mode
Press the shutter button, arrow pad or turn the mode dial.
Turning off the camera sounds [F SILENT MODE]
F SILENT MODE
Submenu 1 Application
OFF Settings are selected individually in [SOUND SETTINGS] (p. 51).
ON
Startup sound, operating sound, shutter sound, warning sound and playback sound are
muted.