35 en – Olympus VH-520 User Manual

Page 35

Selecting a method for connecting

Selecting a method for connecting
the camera to other devices

the camera to other devices

dd [USB Connection]

[USB Connection]

Submenu 2

Application

Auto

Set to select the connection
method each time the camera is
connected to another device.

Storage

Connect as a card reader.

MTP

As a portable device, connect to
PC loaded with Windows Vista/
Windows 7/Windows 8.

● Select [Storage] to use the supplied software.

● Refer to “Connecting with a computer” (p. 39) for the

connection method with a computer.

Selecting the camera sound and

Selecting the camera sound and
its volume

its volume

dd [Sound Settings]

[Sound Settings]

Submenu 2

Submenu 3

Application

Sound Type

1/2/3

Selects the camera
sounds (operation
sounds and shutter
sound).

Volume

0/1/2/3/4/5

Selects the operation
volume of camera
buttons.

q Volume

0/1/2/3/4/5

Selects the image
playback volume.

Adjusting the image processing

Adjusting the image processing
function

function

dd [Pixel Mapping]

[Pixel Mapping]

● This function has already been adjusted at factory

shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.

● For best results, wait at least one minute after

taking or viewing pictures before performing pixel
mapping. If the camera is turned off during pixel
mapping, be sure to perform it again.

To adjust the image processing function

Press the

A button when [Start] (Submenu 2) is

displayed.

● The check and adjustment of the image

processing function starts.

Adjusting the brightness of the

Adjusting the brightness of the
monitor

monitor

dd [ [s

s]]

To adjust the monitor brightness

Use

FG to adjust the brightness while viewing

the screen, and then press the

A button.

MENU

Back