Olympus E-620 - Manual (Page 91)

91
EN
6
Playback fu
nction
s
Protect images you do not want to erase. Protected images cannot be erased by the single-
frame or all-frame erase function.
Single-frame protect
Play back the image you want to protect and press the 0
button.
•
9 (protect mark) is displayed on the top right corner of the
screen.
To cancel the protection
Display the images that are protected and press the
0
button.
Protecting selected frames
This function lets you select multiple images and protect them all at the same time during
single-frame playback or index display.
1
Display the images you want to protect and press the i button.
• The selected images will be shown with v.
• To cancel your selection, press the
i button again.
• During index display, press
p to select the images you want to protect and press the i
button.
2
Press
p to display the next images you want to protect and press the i button.
3
After you have selected the images to protect, press the
0 button.
Canceling all protections
This function lets you cancel the protection of several images at one time.
1 MENU [q] [RESET PROTECT]
2
Use
fg to select [YES], then press the i button.
x
Notes
• Formatting the card erases all images even if they have been protected.
g“Formatting the card” (P. 126)
• Protected images cannot be rotated even when the F button is pressed.
Protecting images
i button
0 button
s0023_e_00_0_unified.book Page 91 Monday, February 2, 2009 5:18 PM