13 en – Olympus T-110 User Manual

Page 13

To remove the SD/SDHC memory card

Press the card in until it clicks and comes out slightly,

then grab the card and pull it out.

Charging the battery and setting up

using the supplied CD

Connect the camera to the computer to charge the battery
and use the supplied CD for setup.

User registration using the supplied CD and

installation of ib computer software is available on
Windows computers only.

The camera battery can be charged while the camera is
connected to a computer.

The indicator lamp lights during charging and turns
off when charging is complete.

Charging takes up to 4 hours.

If the indicator lamp does not light, the camera is not

correctly connected or the battery, camera, computer,
or USB cable may not be functioning as expected.

We recommend that you use a computer equipped

with Windows XP (Service Pack 2 or later), Windows
Vista, or Windows 7. See “Charging the battery with
the supplied USB-AC adapter” (p. 15) if you are using
a different computer or wish to charge the battery
without using a computer.

●

Connecting the camera

Multi-connector

USB cable
(supplied)

Computer (on and running)

Indicator lamp

Windows

Insert the supplied CD in a CD-ROM drive.

Windows XP

A “Setup” dialog will be displayed.

Windows Vista/Windows 7

An Autorun dialog will be displayed. Click
“OLYMPUS Setup” to display the “Setup” dialog.

●