Olympus PTEP11 - Manual (Page 9)

EN 8
EN
Use the supplied/optional accessories
Installation and removal of the monitor hood
„ Installation
Fit the holes of monitor hood into the left and right pins at the top of the monitor window.
Fit the monitor hood into the finder window.
Fit the bottom frame of monitor hood into the rail at the bottom of the monitor window.
„ Removal
Remove the monitor hood from the rail at the bottom of the monitor window by extending it outward.
Remove the monitor hood from the left and right pins at the top of the monitor window.
Remove the monitor hood from the finder window.
Mounting and removal of the body cap
„ Mounting
Fit the convex part in the left and right sides of the body cap into the concave part of the port ring.
Then, turn the port ring (1) to lock.
„ Removal
Turn the port ring (3) while sliding the slide lock of the port ring (2).
Then, remove the body cap.
Rails
2
3
1
PT-EP11_EN.Book Page 8 Friday, November 22, 2013 10:54 AM