Olympus PTEP11 - Manual (Page 21)

EN 20
EN
8. Appendix
Specifications
„ Underwater Case PT-EP11
* We reserve the right to change the external appearance and the specifications without notice.
* The underwater lens port is required.
Supplied accessories for PT-EP11
Optional accessories
* When use combining PTBK-E01 and the Case, the dedicated washers are necessary in the screw part.
If you have PTBK-E01 to which dedicated washers are not bundled, please contact to customer support
center.
Available models Olympus Digital Camera E-M1
Pressure resistance Depth of down to 45 m (147 feet)
Main materials Main body: Polycarbonate
O-rings: Silicone rubber
Dimensions Width 206 mm x Height 163 mm x Depth 127 mm
Weight 1270 g (not including lens port, camera and accessories)
Weight under water Approx. 140g (in the freshwater) (including lens port PPO-EP01, camera
(with flash), 12-50mm EZ lens, battery and media card)
Approx. 235g (in the freshwater) (including lens port PPO-E02, lens port
adapter, camera (with flash), 12-40mm PRO lens, zoom gear, battery and
media card)
O-ring: POL-EP01
Silica gel: SILCA-5S
Body cap: PBC-EP08 Silicone grease: PSOLG-2
Monitor hood: PFUD-EP11
Silicone grease: PSOLG-3
Bracket: PTBK-E01/PTBK-E02
Underwater flash: UFL-2/UFL-1
Macro lens for underwater cases: PTMC-01
Antireflective ring : POSR-EP01/POSR-EP02/
POSR-EP03/POSR-EP05
Underwater port adapter: PAD-EP08
Balance weight: PWT-1BA/PWT-1AD
Underwater optical fiber cable: PTCB-E02
Short arm: PTSA-02/PTSA-03
Macro lens adapter: PMLA-EP01
Zoom gear: PPZR-EP01/PPZR-EP02/PPZR-EP04
Focusing gear: PPZR-EP03
Underwater lens port: PPO-EP01/PPO-E02/
PPO-E03/PPO-E04/PPO-E01
PT-EP11_EN.Book Page 20 Friday, November 22, 2013 10:54 AM