Olympus PTEP11 User Manual
Page 5

EN 4
EN
Installation and removal of the monitor hood ................................................................... 8
Mounting and removal of the body cap............................................................................ 8
Installation and removal of the lens port (PPO-EP01/PPO-E02: optional) ...................... 9
Advance check before use................................................................................................... 11
Remove the O-ring ............................................................................................................... 11
Remove any sand, dirt, etc. ................................................................................................. 11
How to Apply Grease to the O-ring ...................................................................................... 12
Install the O-ring ................................................................................................................... 12
Open the Case ..................................................................................................................... 13
Load the digital camera ........................................................................................................ 13
Make sure the camera is loaded properly ............................................................................ 14
Seal the Case....................................................................................................................... 14
Check the operation of the loaded camera .......................................................................... 14
Water Leakage Test ............................................................................................................. 15
Contents
PT-EP11_EN.Book Page 4 Friday, November 22, 2013 10:54 AM