Installing the digital camera, Open the case load the digital camera, Open the case – Olympus PTEP11 User Manual
Page 14: Load the digital camera
EN 13
EN
3. Installing the digital camera
Open the Case
1
Slide and hold the slide lock towards the arrow direction (1) and turn the open/close dial clockwise
(2).
2
Open the rear lid of the Case gently.
Load the digital camera
1
Raise the ON/OFF lever.
2
Confirm that the digital camera is OFF.
3
Gently insert the digital camera into the Case.
4
Insert a silica gel bag (1g) between the bottom of the digital camera and the Case.
The silica gel bag provided for prevention of fogging.
CAUTION:
Do not exert too much force while turning the open/close dial. Doing so may damage the dial.
CAUTION:
• The silica gel bag will be caught when the Case is sealed and water leakage will occur.
• Once silica gel has been used, the moisture absorption performance will be impaired. Always replace the
silica gel when the Case is opened and closed.
1
2
Slide lock
3
4
PT-EP11_EN.Book Page 13 Friday, November 22, 2013 10:54 AM