Olympus EVOLT E-300 - Manual (Page 19)

19
Attaching a lens to the camera
En
Removing the lens from the camera
1
Make sure the power switch is set to
OFF .
2
While pressing the lens release
button, remove the lens from the
camera by rotating it
counterclockwise.
Lens release button
4
Align the lens attachment mark (red)
on the camera with the alignment
mark (red) on the lens, then insert the
lens into the camera’s body. Rotate
the lens clockwise until you hear it
click.
5
Remove the lens cap.
Lens attachment mark (Red)
Alignment mark (Red)
Lens cap
01E-300BaEN-P1 04.10.21 9:49 PM Page 19