Olympus EVOLT E-300 - Manual (Page 17)

17
En
Attaching a lens to the camera
Usable lenses
Select the lens that you want to shoot with.
Use a specified Four Thirds lens (Four Thirds mount*). When a non-specified lens
is used, AF (auto focus) and light metering will not function correctly. In some
cases, other functions may not work either.
*Four Thirds mount:
Standard developed by Olympus. Lens mount of Four Thirds system. Developed
from the ground up, these all-new interchangeable lenses are based on optic
engineering exclusively for digital cameras.
Four Thirds system interchangeable lens
Designed to withstand severe professional use. The Four Thirds system makes it
possible for a fast lens to be compact and lightweight as well.
The Four Thirds system interchangeable lens lineup includes the following
products:
ZUIKO DIGITAL 14mm-54mm f2.8-3.5:
Standard zoom lens equivalent to 28-108 mm on a 35 mm lens
ZUIKO DIGITAL ED 50mm-200mm f2.8-3.5:
Super telephoto zoom lens equivalent to 100-400 mm on a 35 mm lens
ZUIKO DIGITAL ED 40mm-150mm f3.5-4.5:
Telephoto zoom lens equivalent to 80-300 mm on a 35 mm lens
● When you attach or remove the body cap and lens from the camera, keep
the lens mount on the camera pointed downward. This helps prevent dust
and other foreign matter from getting inside the camera.
● Do not remove the body cap or attach the lens in dusty places.
● Do not point the lens attached to the camera toward the sun. This may
cause the camera to malfunction or even ignite due to the magnifying effect
of sunlight focusing through the lens.
● Be careful not to lose the body cap and rear cap.
● Attach the body cap to the camera to prevent dust from getting inside when
no lens is attached.
Note
01E-300BaEN-P1 04.10.21 9:49 PM Page 17