Olympus TG-2 iHS - Manual (Page 27)

27 EN
White balance Sets an appropriate color scheme for the light of the shooting scene.
e WB Auto The camera automatically adjusts the white balance.
f Sunny Suitable for shooting outdoors under a clear sky.
g Cloudy Suitable for shooting outdoors under a cloudy sky.
h Incandescent Suitable for shooting under tungsten lighting.
 Fluorescent Suitable for shooting under white fl uorescent lighting.
Z Underwater Suitable for underwater shooting.
 One Touch 1 For manually adjusting the white balance according to the light when shooting. Set
a piece of white paper or other white object so that it fi lls the entire screen, and
press the
 button to set the white balance. For how to register one touch white
balance, see “Registering one touch white balance” (p. 28).
 One Touch 2
ISO sensitivity Sets the ISO sensitivity.
l ISO Auto The camera automatically sets the sensitivity with priority on image quality.
m High ISO
Auto The camera automatically sets the sensitivity with priority on minimizing blur caused
by a moving subject or by camera shake.
Q to P Value Set a smaller value to reduce noise in the picture, or a larger value to reduce blur.
Drive Sets the sequential shooting function.
o Single One frame is shot each time the shutter button is pressed.
j Sequential The images are taken sequentially while holding down the shutter for up to 100
frames.
c High-Speed1 The camera takes sequential shots at approximately 15 frames/sec.
d High-Speed2 The camera takes sequential shots at approximately 60 frames/sec.
Image size Sets the number of recording pixels.
5 3968×2976 Suitable for printing pictures over A3 (11×17 in.).
4 3200×2400 Suitable for printing pictures up to A3 (11×17 in.).
3 1920×1440 Suitable for printing pictures up to A4 size (8.5×11 in.).
7 640×480 Suitable for using pictures on emails.