Olympus TG-2 iHS - Manual (Page 19)

19 EN
Taking pictures with [PC] Taking pictures with [PC]
1 Use FGHI to select the direction that the
frames are combined.
2 Press the shutter button to take the fi rst frame.
The edge of the fi rst frame is displayed faintly on
the screen.
3 Compose the next shot so that the edge of the
fi rst frame displayed faintly on the screen overlaps
the subject of the second frame, and press the
shutter button.
4 Repeat step 3 until the desired number of frames
are taken, and then press the
A button or 
button when fi nished.
Panorama shooting is possible for up to 10
frames.
The shot images are combined into a single
panorama image by the PC software.
● For details on installing the PC software, refer
to (p. 56). In addition, refer to the PC software
help guide for details on how to make panorama
images.
A (A mode)
When an aperture value is set,
the camera automatically sets an
appropriate shutter speed. After
pressing
H, you can change the
aperture value using FG.
P
(P mode)
You can shoot with special effects.
Refer to the sample images displayed
on the submode selection screen, and
select the desired submode.
The best shooting settings for each
effect are pre-programmed, so some
function settings cannot be changed.
● Note that some effects may not be applied to
movies.
C1, C2 (Custom mode)
In C1 and C2 mode, you can call up
shooting settings that you have stored
in advance.