Olympus E-600 - Manual (Page 94)

94
EN
Cust
o
m
izi
n
g
your
c
a
mer
a
8
BULB FOCUSING
You can set the camera to enable focus adjustments during bulb shooting with MF.
[ON] During exposure, you can turn the focus ring and adjust the focus.
[OFF] The focus is locked during exposure.
FOCUS RING
You can customize how the lens adjusts to the focal point
by selecting the rotational direction of the focus ring.
S BUTTON/DIAL
DIAL FUNCTION
You can also switch the operation of the control dial to the opposite of factory default settings.
For example, after setting [P] to [F], in P mode you can adjust the exposure compensation
using the control dial and set the program shift using the control dial while holding down the
F button.
DIAL DIRECTION
You can select the rotational direction of the control dial and the direction in which the shutter
speed/aperture value will increase or decrease.
Mode Setting j F button + j
P
% (program shift) Program shift Exposure compensation
F Exposure compensation Program shift
A
FNo. Aperture value Exposure compensation
F Exposure compensation Aperture value
S
SHUTTER Shutter speed Exposure compensation
F Exposure compensation Shutter speed
M
SHUTTER Shutter speed Aperture value
FNo. Aperture value Shutter speed
Setting q (rotational direction of the dial) r (rotational direction of the dial)
DIAL1
• Slower shutter speed
• Open the aperture (f-number is decreased) • Faster shutter speed
• Close the aperture (f-number is increased)
DIAL2
• Faster shutter speed
• Close the aperture (f-number is increased) • Slower shutter speed
• Open the aperture (f-number is decreased)
Near
Near
)
)
s0030_e_00_0_unified.book 94 ページ ２００９年７月３日 金曜日 午後４時１１分